-
ZBF-T100 Blast Furnace
measurement of cooling wall water temperature difference of blast furnace soft water closed circulation system is the key technology of blast furnace automation and measurement and control. With the development of blast furnace control technology and the improvement of process requirements, the measurement and control of blast furnace cooling water temperature difference becomes more important. In actual production, excessive temperature difference of cooling water reflects that the furnace wall
2022-07-14
-
SPD-V200 Multifunctional Roll Gap Meter System
SPD-V200 multifunctional roll gap meter is a measuring device with rechargeable battery power supply group developed by Wuhan Zhongfeiyang Measurement and Control Engineering Technology Co., Ltd., controlled by high-speed DSP, and used to automatically measure the physical parameters of continuous casting machine. It can obtain measurement results such as roller gap, butt state of outer arc roller, roller bending, outer arc roller centering, secondary cold water, etc. It is transmitted to techni
2022-07-14
-
LAG-S100 Bale Slag System
LAG-S100-type large-bag slag reduction system is a large-bag slag reduction detection system designed by Wuhan Zhongfeiyang Measurement and Control Engineering Co., Ltd. for continuous casting process. It adopts white noise and high temperature signal acquisition and transmission technology to realize the amount of slag in the process of large-bag pouring Online real-time detection process.
2022-07-14
-
BPS-K600 Leakage Forecast System
BPS-K600 breakout prediction system adopts neural network and combines with traditional artificial intelligence and information technology to overcome the defects of traditional logic prediction model and has adaptive, self-organizing and self-learning functions. It has an industrial network optimization architecture. According to the distribution law of the temperature field of the on-site crystallizer, real-time response and tracking, self-learning and self-judgment, providing early warning in
2022-07-14
-
Online Continuous Temperature Measuring Scheme for the End of Continuously Cast Product
The system aims at the continuous detection of the temperature at the end of the product obtained from the continuous casting machine. The continuously cast product and its surrounding environmental factors such as scale, steam, shielding and other factors, are considered in the scheme design and equipment selection. The accurate detection and real-time transmission of temperature during the movement of the cast product are also considered.
2022-07-12
-
Brief Introduction of Tundish Level Control System
The tundish is the intermediate container between the ladle and the mold. The purpose of using the tundish is to reduce the static pressure of molten steel, stabilize the steel stream, and reduce the impact and agitation of the steel stream on the molten steel in the mold. When the molten steel stays in the tundish, non-metallic inclusions have the opportunity to partially float.
2022-07-12
-
The Introduction of Continuous Casting Products
We have many measurement and control device for continuous casting machine, including ladle slag detection system, tundish temperature measurement, mold breakout prediction system, converter lining thickness gauge etc.
2022-07-12
-
Introduction of Dynamic Secondary Cooling Water System
After the introduction of the continuous casting computer control technology from Demag and VAI, our company has accumulated rich experience in the understanding of the dynamic secondary cooling water model through the study and debugging of the on-site technicians, and developed the dynamic secondary cooling model which is more suitable for on-site production and various parameters required.
2022-07-12
