ZDY-3D150 Billet Taper Measuring Instrument

ZDY-3D150 Billet Taper Measuring Instrument

ZDY-3D150 billet taper measuring instrument is specially used to measure the opening of copper tubes in billet mold. The equipment has high test resolution, accurate measurement, stable data, and is easy to use. It is specially suitable for the opening debugging of copper tubes in various billet mold.

Product Introduction of ZDY-3D150 Billet Taper Measuring Instrument

ZDY-3D150 billet taper measuring instrument is specially used to measure the opening of copper tubes in billet mold. The equipment has high test resolution, accurate measurement, stable data, and is easy to use. It is specially suitable for the opening debugging of copper tubes in various billet mold. Because the opening accuracy of the copper tube will directly affect the quality of the billet, this equipment is an indispensable detection equipment in the continuous casting equipment, which can fully meet the needs of on-site installation testing and process verification.

Detection principle of ZDY-3D150 billet taper measuring instrument

ZDY-3D150 billet taper measuring instrument uses a high-precision displacement sensor installed in parallel in the measuring probe to measure the opening of the copper tube in the mold. The sensor outputs a voltage signal; at the same time, the encoder installed at the bottom of the measuring body outputs a pulse signal according to the stroke. The measured voltage signal and pulse signal enter the data acquisition unit. The voltage signal is converted by A/D, and the conversion result is sent to the single-chip microcomputer for processing, while the pulse signal can be directly processed by the single-chip microcomputer. Then the wireless transmission module transmits the data to the handheld terminal, and the handheld terminal immediately displays the measurement results after data processing.

       ZDY-3D150 billet taper measuring instrument technical parameters

      Opening measurement range:
      280-probe: 282-292mm
      380-probe: 384-394mm
      410-probe: 414-424mm

      Display accuracy: 0.01mm
      Measurement accuracy: 0.05mm
      Working temperature: -10℃—50℃
      Battery capacity: 5000mAh
      Charger specification: 12V